| number of axis | 1, 2, 3 | 1, 2, 3 |
| programming of system parameters | x | x |
| selectable axis name | x | x |
| switchable for use on a lathe or milling machine | x | x |
Software setup for fixing resolution, measuring step
and counting direction | x | x |
| function to delete a parameter | x | x |
Reset- and Preset input
(Reset of the displays by pressing one button) | x | x |
| addition/subtraction of the display value with the keybord | x | x |
bolt hole pattern, graduated circle function,
rectangular drilling pattern | x | x |
| Reference mark evaluation (quasi-absolut) | x | x |
| Hardware test and display test | x | x |
| 99 tool corrections (lathe mode) | | x |
| 99 datum points (milling mode) | | x |
| store values for axis display | x | x |
| absolute/incremental | x | x |
| mm/inch conversion | x | x |
| centering (divide by 2) | x | x |
| radius/diameter | x | x |
each axis is adjustable for Rotary or Linear Encoder input.
Rotary Encoder input will be displaying
lines/revolution and decimal degrees | | x |
| linear error correction programmable (4 point correction) | x | x |
| notlinear axes-error correction | | x
(100 corr.
points) |
| shrinkage ±40% | x | x |
summing for two axis (Z + Z1) | x | x |
| display for approximation to zero point | x | x |
| feed display | | x |
| axes movements with displayed remaining travel way | | x |
| inbuilt stop-watch | | x |
| taper function | | x |
| display of spindle speed | | x |
Bi-directional RS 232 interface to connect a printer or a personal computer
(control system with extern commands)
Baudrate and data format are adjustable via software | | o |
8 free programmable switch off and pre-switch off points with relay output,
programming to a 0,1 sec. short signal or a direction signal | | o |
| analog output | | o |
| edge probe input | | o |
| output for constant surface speed | | o |
| external input | | o |
| external Reset for each axis | | o |
| special display for spark erosion | | o |
| compensation for grinding wheels | | o |
Digital Read Outs
pdf